Setting the Standard in AZ Roofing Since 1993

602-638-3135 Phoenix     |     520-900-1442 Tucson     |     Price My Roof

How to Repair Your Arizona Roof When You Have Rooftop Solar Panels

Arizona is one of the highest solar adoption states in the country, according to the Solar Energy Industries Association. That means a large and growing number of Arizona homeowners who call a roofer for repair also have rooftop solar panels. The good news is that many roof repairs on solar-bearing Arizona homes can be performed without removing any panels at all. The more nuanced answer is that it depends entirely on where the repair is needed. Lyons Roofing has been repairing Arizona roofs with rooftop solar since solar became widespread in the Phoenix and Tucson markets. Licensed under AZ ROC# 348074, fully bonded and insured, recognized by the BBB with an Ethics Award and A+ rating, and a member of the Arizona Roofing Contractors Association. Call 602-638-3135 (Phoenix) or 520-900-1442 (Tucson) for a free roof inspection on your Arizona solar home, available 24/7.

The Core Question: Does Your Repair Require Panel Removal?

The first step in planning any roof repair on an Arizona home with solar panels is determining where the repair is needed relative to the panel array. This determines everything about the process and timeline.

  • Repair location outside the panel array: flashings at chimneys, skylights, and wall transitions not beneath the panels; tile or shingle damage in exposed sections of the roof; valley repairs in drainage zones outside the array. These repairs typically require no panel involvement whatsoever and proceed exactly as a standard repair would
  • Repair at racking penetration points: failed sealant at the mounts where solar racking attaches to the roof structure through the roofing system. This is the most common repair Lyons Roofing performs on Arizona solar homes, and it requires temporary removal of the affected panels by a licensed solar contractor before roofing can access the penetration
  • Repair beneath the panel array: underlayment failure, decking damage, or tile damage directly beneath the panels requires full removal of the panels in the affected section by a solar contractor before the roofing repair can proceed

The Most Common Repair Arizona Homeowners With Solar Actually Need

Racking Penetration Seal Failures

The single most common roof repair Lyons Roofing performs on Arizona homes with rooftop solar is racking penetration seal failure. Every solar panel racking mount attaches to the roof structure through the roofing system with a bolt that is sealed against water entry. On a typical Arizona residential solar installation with 20 to 30 panels, there can be 40 to 60 individual mounting penetrations on the roof surface, each representing a sealed transition between the racking hardware and the roofing material.

Arizona’s daily temperature swings between cool desert mornings and extreme afternoon highs create repeated thermal cycling at every one of these penetration points. The racking hardware heats to very high temperatures during Arizona’s summer afternoons and cools significantly overnight. This mechanical cycling fatigues the sealant at each penetration point over time. When sealant begins to separate from either the racking base plate or the roofing material, water entry follows. This failure typically appears as a ceiling stain in the interior below the affected panel section.

Flashing Failures at Non-Panel Roof Transitions

Chimneys, skylights, solar tube lights, HVAC vents, and wall transitions on solar-bearing Arizona roofs develop the same flashing fatigue patterns as on any Arizona home. These repairs proceed without panel involvement as long as the damaged transition is not directly beneath the panel array. Our residential roof repair team addresses flashing failures as a primary repair category throughout Phoenix, Tucson, and surrounding communities.

Tile or Shingle Damage Outside the Panel Array

Cracked or displaced tiles and damaged shingles in roof sections not covered by panels are standard repairs requiring no solar coordination. Our residential tile roof repair team handles these throughout Arizona. Post-monsoon tile displacement and hail-related tile cracking on the exposed sections of solar-bearing roofs are among the most common repair calls we receive after storm events during Arizona’s monsoon season.

How to Identify a Racking Penetration Leak Before Calling

If your Arizona home has solar panels and you develop a ceiling stain or interior moisture indicator, you can narrow down whether a racking penetration leak is likely by correlating the stain location with the panel array footprint. Ceiling stains that appear directly beneath a section of roof that is covered by solar panels, and that appeared after a rain event, are highly likely to be penetration-related. Stains that appear in sections of the ceiling not beneath the panel array are more likely to originate from flashings, valleys, or other transitions.

Lyons Roofing’s residential drone roof inspections provide aerial imaging of the exposed roof sections surrounding the panel array and can identify many surface conditions that indicate a developing repair need without requiring panel removal. For comprehensive evaluation of what is happening at and beneath the panels themselves, temporary panel removal by a solar contractor combined with a ground-level inspection is the most complete approach.

The Repair Process on an Arizona Roof With Solar Panels

  • Free Inspection to Determine Scope. Lyons Roofing inspects all accessible roof sections, evaluates all visible flashing transitions, documents racking penetration condition at accessible mounting points, and determines whether the repair location requires panel involvement.
  • Solar Contractor Coordination If Needed. If the repair requires panel removal, Lyons Roofing coordinates with your existing solar company or connects you with a licensed solar service provider for temporary panel removal. We provide the solar contractor with a clear access window and specific repair scope.
  • Roofing Repair Execution. With all necessary access established, Lyons Roofing performs the repair using materials compatible with both your roofing system and the solar racking components at any penetration zones.
  • Solar Reinstallation and Verification. If panels were removed, the solar contractor reinstalls them after the roofing repair is complete and the work has been inspected.
  • Written Documentation. You receive written repair documentation covering scope of work, materials, and warranty terms, supporting any insurance claim or manufacturer warranty documentation needed.

Why Racking Penetration Seals Fail Faster in Arizona Than Other States

Arizona’s climate creates more severe thermal cycling conditions at solar racking penetration points than most other solar markets in the United States. The same U.S. Department of Energy resource that guides homeowners on solar installation decisions notes that roof age and condition are primary considerations before solar. What it does not fully address is the accelerated sealant fatigue that Arizona’s extreme temperature swings create at every racking penetration point post-installation.

In a temperate climate, a racking penetration sealant might cycle through a 20-degree temperature range daily. In Phoenix and Tucson, the cycle can exceed 50 to 60 degrees between cool mornings and extreme midday temperatures at the rooftop surface level, where the dark roofing material absorbs solar radiation and reaches temperatures well above air temperature. This daily mechanical stress accumulates at every penetration point through thousands of annual cycles, creating the sealant fatigue timeline that makes penetration seal repair one of the most common services on Arizona solar homes in the 10-to-15-year age range.

Frequently Asked Questions: Roof Repairs on Arizona Homes With Solar Panels

Do solar panels need to come off for roof repairs in Arizona?

Not always. Whether panels need to be removed for a roof repair depends on where the repair is located relative to the panels. Flashing repairs at a chimney, skylight, or wall transition that is not beneath the panels can often be performed without removing any panels. Repairs in sections of the roof beneath the panels, or at the racking penetration points themselves, require solar contractor involvement for panel removal before roofing access is possible. Lyons Roofing evaluates your specific repair location during the free inspection to determine what panel involvement is needed.

Can Lyons Roofing repair roof leaks that originate at solar panel mounting points?

Yes. Racking penetration seals are one of the most common roof leak sources on Arizona homes with solar panels. The racking mounts bolt through the roofing system into structural members, and the sealant at each penetration point is subject to the same thermal cycling fatigue that affects all Arizona roofing transitions. When racking penetration seals fail, water enters the roof system at each mounting point. Repairing these penetrations requires temporary removal of the affected panels by a solar contractor, followed by Lyons Roofing re-sealing or re-flashing the penetrations with roofing-compatible materials.

How do I know if my roof is leaking under my solar panels?

Interior ceiling stains in rooms below solar-bearing roof sections are the most common indicator. Increased moisture in the attic space detectable through inspection access is another. In some cases, homeowners discover deteriorating decking during a separate roof inspection when panels are temporarily removed for solar system service. Thermal imaging drone inspection can identify moisture differences in roofing systems without removing panels. Lyons Roofing’s residential drone roof inspection service is particularly useful for solar-bearing roofs where surface access inspection would require panel removal to be comprehensive.

Will repairing my roof affect my solar warranty?

Roof repair work performed on areas away from the solar panels and racking does not typically affect solar system warranties. Repair work that involves re-sealing or re-flashing the racking penetration points may have warranty implications depending on your original installer’s terms and whether the penetration work is performed by a licensed solar contractor using compatible materials. We recommend reviewing your solar system installation warranty terms before scheduling repair work in any penetration zones.

What is the most common roof repair needed on Arizona homes with solar panels?

Racking penetration seal failures are the most common repair we perform on Arizona homes with rooftop solar. Each racking mount creates a penetration through the roofing system, and Arizona’s daily 40-degree temperature swings create repeated thermal cycling at every one of these penetration points. Sealant that was adequate at installation typically fatigues within 10 to 15 years. When it fails, each penetration point becomes a potential water entry pathway. On a typical Arizona residential solar installation with 20 to 30 panels, there can be 40 to 60 individual mounting penetrations on the roof surface.

Can a roof inspection see the condition of sections beneath solar panels without removing them?

A standard visual roof inspection cannot evaluate the full condition of roof sections directly beneath solar panels without temporary panel removal. However, Lyons Roofing’s drone inspection service provides aerial imaging of the exposed roof sections surrounding and adjacent to the panel array, which can identify surface conditions, flashing failures, and visible deterioration that warrant further evaluation. For comprehensive evaluation of what is happening beneath the panels themselves, panel removal by a solar contractor provides the most complete picture.

How long does a solar panel roof repair take in Arizona?

A roof repair that does not require panel removal typically takes the same time as any comparable repair on a standard roof: one day or less for most targeted repairs. Repairs that require panel removal add coordination time for the solar contractor visit before and after the roofing repair, which extends the total project timeline to two to four days depending on contractor scheduling. Lyons Roofing coordinates directly with your solar company or solar service provider to minimize the total timeline.

Does homeowners insurance cover roof leak repairs that originate at solar panel mounts?

Coverage for roof leak damage originating at solar racking penetrations depends on whether the failure is classified as gradual wear or sudden accidental damage under your specific policy. Damage classified as gradual deterioration is typically not covered. Some homeowners insurance policies have specific exclusions or limitations for damage related to solar installations. The Arizona Department of Insurance and Financial Institutions provides consumer information on homeowners insurance coverage questions. Documenting the repair with a professional inspection report establishes the nature and cause of the failure for any insurance discussion.

Will repairing the roof around my solar panels void my solar equipment warranty?

Roof repair work that does not involve the solar racking or mounting hardware does not typically interact with solar equipment warranties. The solar equipment warranty covers the panels and inverter as hardware items. The racking installation and penetration sealing is typically under a workmanship warranty from the original installer. When penetration resealing is needed as part of a roof repair, using a licensed solar contractor for that specific component of the work preserves the warranty relationship with the original installer.

Can I get a roof inspection done while solar panels are on my Arizona home?

Yes. Lyons Roofing provides free roof inspections on homes with rooftop solar throughout Phoenix, Tucson, and surrounding Arizona communities. Our inspection evaluates all accessible roof surfaces, flashings, and transitions. For sections beneath the panels, we clearly document what is and is not visible and recommend whether comprehensive panel-under evaluation is warranted based on the age of the installation, any moisture indicators found in adjacent areas, and the condition of accessible racking penetration seals.

How does Arizona’s climate specifically affect roof systems that have solar panels?

Arizona’s extreme thermal cycling creates elevated stress at solar racking penetration points compared to cooler climates. The racking hardware heats to very high temperatures during the day and cools significantly overnight, creating daily mechanical stress cycles at the sealant interface. Additionally, the panel array creates shaded zones on the roof surface that experience different temperature profiles than adjacent exposed sections, which can create differential thermal movement. This makes the racking penetration zones among the highest-priority inspection points on any Arizona solar-bearing roof.

How much does it cost to repair a roof with solar panels in Arizona?

Lyons Roofing does not publish repair pricing because costs depend on the repair scope, system type, extent of damage, and whether panel removal is needed. The free inspection and written assessment we provide before any work begins gives you a specific, itemized proposal. There is no cost for the inspection and no obligation to proceed before reviewing the assessment.

My solar installer says my roof is fine. Should I still get a roofing contractor’s opinion?

Yes. Solar installers are experts in solar system design and installation but are not typically licensed roofing contractors. Their assessment of a roof’s structural suitability for a solar installation does not constitute a professional roofing inspection. A licensed roofing contractor evaluating the same roof evaluates underlayment condition, flashing integrity at all transitions, decking condition indicators, and all the system-level factors that determine long-term waterproofing performance. These are fundamentally different assessments.

Who should I call first about a potential roof leak on an Arizona home with solar panels?

Call a licensed roofing contractor first. Lyons Roofing is available at 602-638-3135 (Phoenix) or 520-900-1442 (Tucson) 24 hours a day, 7 days a week for roof repair inquiries and emergencies throughout Phoenix, Tucson, and surrounding Arizona communities. We schedule a free inspection, evaluate the leak source, determine what panel involvement is needed, and coordinate with your solar company for any panel removal required. Starting with the roofing contractor keeps the process organized because the roofing assessment determines the scope before any other coordination is needed.

How do I schedule a roof repair inspection on my Arizona home with solar panels?

Call Lyons Roofing at 602-638-3135 (Phoenix) or 520-900-1442 (Tucson) or complete the free inspection request form on our website. We serve all neighborhoods throughout the Phoenix and Tucson metro areas. The inspection is free, includes a written condition report, and carries no obligation to proceed before reviewing our assessment. We handle solar coordination as part of every repair project where panel involvement is needed.

When to Call Lyons Roofing for Solar Home Roof Repairs in Arizona

Call 602-638-3135 (Phoenix) or 520-900-1442 (Tucson) or request a free inspection if your Arizona solar home has any of the following: ceiling stains appearing beneath the panel array area; visible deterioration at any accessible racking penetration point; increased attic moisture; tile or shingle damage visible from the ground on exposed sections; any active roof leak during or after a monsoon storm. Available 24/7. Licensed under AZ ROC# 348074, fully bonded and insured, serving Phoenix, Tucson, and all surrounding Arizona communities.

Free Roof Repair Inspection, Arizona Solar Homes

AZ ROC# 348074 | Licensed, Bonded and Insured | 30+ Years | Call 602-638-3135 (Phoenix) or 520-900-1442 (Tucson)

(520) 485-5324 (520) 485-2838